Just look

T1-11-siding-installation, t1-11 siding is designed for installation on framing with standard 16-inch spacing. you can attach them with exterior screws or galvanized nails. wrap the house with house wrap or 15 mil tarpaper..... T1-11 siding can be installed using 1 5/8-inch exterior screws or 12d galvanized nails, and it’s best to start from the bottom up to achieve a clean, seamless application. however, t1-11 should never actually be installed flush with the ground, as this contact can increase moisture buildup and promote mold growth., t-111 siding is a type of plywood siding that was once one of the most commonly used types of siding on homes, sheds and garages, as it is very inexpensive and fairly easy to install. however, this type of siding is no longer widely used, due to the weather damage issues it is prone to..

T1-11 siding installation: two tips written by donna ryan on dec 10, 2010. to ensure our content is always up-to-date with current information, best practices, and professional advice, articles are routinely reviewed by industry experts with years of hands-on experience. ..., t1 11 siding is essentially a plywood panel-based siding that is laminated for extra durability. its external appearance is cleverly manipulated to resemble that of natural wood. this is done by establishing long, vertical strands that resemble natural wood grain found in hardwoods..

T1-11 siding is a functional siding with great aesthetics so what is the issue with this siding. water damage is the primary reason it fails. the plywood siding has less of an issue with water damage than the osb has. to prevent water damage with any siding it requires proper installation, sealing, and maintenance., secure the center of the t1-11 siding to its wall stud. place an 8d nail every 8 inches down the wall stud behind the center of the siding, using the chalk line as a placement guide. pound the nails into the siding until its head countersinks into the siding's surface. step 7