Stone-siding-installation-instructions, featured in stone siding is a building material that simulates the appearance of solid stone construction but at a cheaper price. in order to properly install stone siding, the material must be glued to the side of the house.. Once the lath is attached, apply mortar to the lath, 1/16" to 1/8" thick. then apply mortar to the stone and attach to the surface. hold the stone against the surface for five seconds until it sets., back. versetta stone offers the best of both worlds: the beautiful, timeless look of stone along with panelized installation that’s within reach of nearly any contractor or experienced diyer.. much like a traditional siding panel, versetta stone siding features an integrated nailing flange so it can simply be nailed or screwed into the wall..
Faux stone siding installation instructions: tape measure and level construction adhesive & caulking gun electric or hand saw screws power drill quality uv/fade resistant, exterior varnish step by step instructions tool & material checklist special instructions and notes example, learn more about stonefaçade™ installation instructions from certainteed.. Cultured stone installation guides and resources for builders and architects., install starter strip – place at the bottom of where the stone is to be applied. provides a level, solid base for the stone siding installation. attach weather resistive barrier (for exterior installations) – we recommend 2 layers of grade d building paper or #15 felt (check local building codes)..
Download guides, checklists, spec sheets and watch step by step how to install videos and see how anyone can install genstone., to ensure proper installation, fasten lath to framing so the weight load of the adhered manufactured stone veneer system can be transferred to the framing. that means using appropriate length fasteners (make sure they are galvanized and corrosion-resistant) to obtain a minimum ¾” penetration into the framing.