James-hardie-stucco-panel-siding-installation, the james hardie co. manufactures and sells a range of exterior shingle, siding, board, panel and trim products. hardiepanel vertical siding is one of their key product lines, and, like other hardie materials, it is constructed of cement and fiber for durability.. After installing the lower course of james hardie stucco panel siding, install vinyl or coated aluminum "z" flashing at the top edge of the stucco panel. make sure the flashing is sloped away from the wall. install the second level or gable stucco panels leaving a 1/4" minimum gap between the bottom of the stucco panel and the "z" flashing., com1220-p2/4 12/15 stud furring strip** batten joint installation: hardiepanel vertical siding must be joined on stud. position fasteners 3/8 in. (9.5mm) from panel edges and no closer than 2 in. (50mm) away from corners..
114 effective december 2019 hardiepanel ® vertical siding general reirements • these instructions to be used for single family installations only. **for commercial / multi-family installation, instantly access installation info, technical bulletins, sds sheets & more.. As a homeowner, you will work with a contractor, who will facilitate the installation of your james hardie® siding, trim, soffit, wrap and flashing products (including products with colorplus® technology)., re-siding your house with hardiepanel vertical siding—or combining it with hardieplank® lap siding—is sure to add visual punch to your design..
Shop james hardie 48-in x 96-in-hz10 hardiepanel stucco fiber cement vertical siding in the fiber cement siding department at lowe's.com. as america's #1 brand of siding, james hardie® fiber cement siding and trim bring beautiful design and superior performance to homes from coast to coast.