Ceiling-fan-light-chain-wont-pull, ceiling fans with lights have a pull chainto turn the fan or the lights on or off. these pull chains get pulled on daily and can be broken. if you pull too hard on the pull chain the chain can break or come out of its socket. also, the light switchitself may wear out or fail.. The ceiling fan has a wall switch and drop down chains to turn fan on/off also light chain. fan is working by switch and chain, but light chain won't pull to turn on light. light is off and i need it badly. please suggest., check the breaker for the fan circuit if you don't hear anything when you pull the chain. reset it if it's tripped. if it won't stay closed, there's probably a loose wiring connection, either in....
Ceiling fan lights are an attractive way to lower your cooling bill. most of these fans are operated with pull switches to adjust the speed and light settings. over time the chain attached to the switch can jam, keeping you from pulling it. when this happens, the easiest solution is to simply replace the entire switch assembly., you'll need to remove the light kit from the fan, and take out the light switch inside. first, shut off the power running to the fan. you can do this from the circuit panel in your home. once the power is shut off, look at the base of the fan where the light kit is attached..
Replace the old switch with a new pull chain switch, then place the end cap back onto the light fixture. carefully reattach the wires from the switch to the light, remembering to pair black to black and ground to ground. wrap electrician's tape around the exposed wire ends and push them back into the fixture., replacing a broken pull chain switch on a ceiling fan. if the chain on your ceiling fan has ever pulled out then this is how to repair it. an easy repair you can do yourself and save lots of money..
All you need is wd40 spray inside switch it should work for light switch aswell,if it dont work for you then need switch replaced,im not doing this to get subscribers just to help you some of you ..., if the pull chain for your ceiling fan won't pull, you will need to remove the housing for the switch. after unscrewing and removing this portion of the fan, you should be able to see the switch and the pull chain in their entirety. if the chain is broken or out of place, you can unscrew its casing and remove it from the switch assembly.